Hi folks,just a little guide for anyone with failed back lights.I got a brand new set from CHS LTD,today,stripped the screen down,ready to fit new LED strips.Once your in a position where just the white backing reflector & LED strips are left fitted to the metal back,be careful how you handle the four plastic stand offs/sheet retainers,they are made from very cheap plastic & easily broken. Vestel also glue them in place on the backs with hot melt glue.The white reflector sheet is also held in place with double sided tape.I found gentle heat from a hair dryer softened the glue,which will minimize any creasing of the sheet.The back light strips are mounted down the screen this time & stuck with double sided tape,again a bit of heat & they come off very easy.The new ones have fresh tape & stick very well. Just thought it might help if you've not done one before,not trying to teach anyone how to suck eggs,Lol.
John.