Forum > LCD TV forum
17mb45-2
Turnip:
Hi shaun,
Don't think UMC deals with Vestel SSBs though 4725 is useful. Should you get a programmer, have a bin for a similar Vestel model - Best of luck with it - Chris.
vinceroger69:
--- Quote from: t1412 on June 13, 2017,11:17:53 ---hi went into diagnostic there's no factory reset in there, also the hotel mode is select to yes can't select no thanks
shaun
--- End quote ---
what about Menu 4725 then select "RESET" ?
Hotel mode MENU, 1,3,2,5 ?
Turnip:
Hi shaun,
Tried those a while ago but couldn't find a way to copy good firmware to a USB stick, as it seems not recognised, or I'm not pressing the right code to do it.
If I have the full USB firmware, the set won't start so I can't use it.
Note that reading the Eeprom tends to give maybe 2 mb but firmware as downloaded is at least 10 Mb often much more, so suspect the on board Nand Flash is involved, and is liable to be terminally corrupted.
Recall a chap on Quuq recently, having examined/replaced Vestel Nand Flash chips, as was the case. Best of luck - Chris.
t1412:
this tv has been a nightmare chris, it was ok yesterday turn it on got into the service mode ok, now today won't fire up inverter not starting if i unplug the inverter you can hear psu working, have recapped the psu, so gonna look in me shed see if i've got a inverter knocking about, do like a hard fault sometimes, but this was going to leave through window haha, can't have easy ones all the time, i'm not going to learn anything by giving up thanks
shaun :41:
Turnip:
Hi shaun,
Just had a Vestel in that sometimes wouldn't start after being in s/by, and even if it did, it would cut out and restart three times a day.
Had a suspicion that it was a duff Nand Flash chip. Gather even when new they're sold being several percent duff as seemingly duff areas are blanked out and not used.
Mind you, they're awful cheap.
In my case another SSB from Ebay did the biz, could be the easiest way - Chris.
Navigation
[0] Message Index
[*] Previous page
Go to full version