Forum > PLASMA TV forum

Panasonic TX-P50VT30B - 7 Flash issue.

<< < (3/3)

Turnip:
Hi Bruce,

Note it's a common issue where mended boards go for £150 a pop, and there are duff ones for folks who want to try their iron.

Suspect though that 'Pop' is the word. Can imagine 'Plasma' folk fitting repaired ones with maybe just two screws to hold 'em in whilst pouring a beer.

Could be wrong but suspect 'Plasma' people are just a bit different from LCD folks who count the cost of buying and using television.

Out - Presumably fed - Chap below gives 5 free 30F131 extra with every order - 'For next time'

microtechservice@hotmail.com

downunder:

Hi Chris,

Tried my hand at another SC board today using FETs from a donor board. To remove the good FETs for transplant, I snipped the 2 legs then used an iron to heat the back plate till it came away. Unfortunately, most of them were open after I detached them, so I couldn't use them. Looks like it's off to ebay for kits so that one doesn't have to desolder them to start with. Such is life.  -  Bruce

Turnip:
Hi Bruce,

Many times tried solder-wick then tried lift legs just a micron to get Fets off the board. Hardy ever works as encapsulating plastic seems tired by thermal recycling and they fall to bits.

Suspect your SC board Fets are IGBTs - A certain Ebay supplier provides several free ones with the basic kit for only £20.00.

They also seem to do AS15-XX chip replacements for £15.00 return post paid - Chris.

downunder:

Hi Chris,

Couldn't track down your supplier so I ordered 25 assorted SC parts for around 15 AUD from Aliexpress - cheap as chips, so I hope they're not duds. - Bruce

Navigation

[0] Message Index

[*] Previous page