Forum > LCD TV forum

JVC LT-32DR1BJ - Tuning issue.

(1/3) > >>

Turnip:
Hi folks,

Have one in where a few existing channels in memory work. Tried re-scan a couple of times where set searches end to end but finds nothing.

Guess a SSB BGA issue and can't find a manual to try a reset - Thanks for thoughts - Chris.

downunder:

Hi Chris,

Depends if it's a genuine JVC or a rebadge.....JVC used to make some top gear. My guess is a rebadge. Try "Source/Input/AV" 2580 in sequence.

Otherwise simultaneously press and hold Input and Mute.                              Bruce

Turnip:
Thanks Bruce,

Suspect it's a genuine JVC as later ones in the UK were Turkish Vestel rather than the Oriental ones you probably enjoy.

Can't complain about Vestel as the UK is flooded with them in 'Known Makes' and they're pretty good with schematics and USB updates. Trouble is there are so many variations in everything it's hard to get a replacement anything which works with a particular set - Chris.

michael first:
Hi,Chris

the way to enter the service, is below

HOW TO ENTER THE SERVICE MODE
(1) Press [INFORMATION] key and [MUTING] key on the
remote control unit simultaneously to enter the SERVICE
MODE SCREEN.
(2) In the SERVICE MENU, press the [1] key to display
ADJUSTMENT MODE SCREEN.

to exit,press BACK button on the remote

Turnip:
Hi Mike,

Thanks a lot, will give it a try - Chris.

Info and muting worked for service mode. Was hoping for 'Factory Reset' but not there.

Notice set has a USB input but suspect it isn't for updates. Wonder if anyone has a manual for the set as can't find anything similar online ?

Navigation

[0] Message Index

[#] Next page