Forum > CRT TV forum

Learning CRT repair.. black screen, no raster, but sound?

<< < (5/5)

astracat:
hi and well done but 2,10k in parallel is still hi suggest to replace with correct value
regards
astracat

flgliderpilot:
Yes a little high, but the VCC range for the TD3505 is 6V-24V, and now it's getting 12.03V with a 5 ohm.  I'm not too worried about a .3 ohm difference in this scenario. FWIW all of the 4.7 ohm resistors actually measured 6 ohms on my meter (which probably isn't all that accurate anyway).

astracat:
hi its ok with 5ohms but 2x10k is 5000ohm so presume you must have done a typo error
good luck with future repairs
astracat

flgliderpilot:
Yeah sorry typo, two 10 ohm.

Navigation

[0] Message Index

[*] Previous page