Forum > LCD TV forum
Samsung edge lit screens.
Turnip:
Hi Davy, you've got me there, knowing nothing about IR glues.
Picture seems pretty even top to bottom though I did forget the order of the various sheets - Recall there were three to do something or other, and possibly replaced them in the correct order, though don't know if it's significant.
Worst bit was static electricity, where the more I wiped off extraneous crap, the more it flew in - Fun, so ordered 50 more Leds from China as guess there will be a lot more, and next time I will label the sheets - Chris.
Davy:
I try to keep the sheets sandwiched between two dustbin liners, my way of thinking is they will grab particles better than the filters due to the static charge. It's a real pain keeping the dust and hairs out.... you can't see the devil but when it lands on the filters it can be quite noticeable.
Remember well, unpacking a Hoover auto washing machine from the box..... I yanked the plastic bag it was wrapped in and got one hell of a belt, ya could have lit a city with the charge.
I'll stand to be corrected, the most mottled or denser sheet goes on the bottom and mistier ones at the top.
You could try the old grammy phone antistatic brush or cloth if they must be wiped, I did wipe one once with a very lightly moist lint free cloth and seemed to turn out OK after letting it dry a few minutes.
Dave
sinclairtv:
Denser sheet on bottom as you say as the top ones have 'lugs' to go on plastic surround
downunder:
I try to remove them as one sheet, all together, but just in case I scrawl numbers on the plastic tabs before I remove them. Apparently the order is significant. It's when you attempt to clean them that you get all confused. Bruce
Navigation
[0] Message Index
[*] Previous page
Go to full version