Forum > LCD TV forum

TX-l32s10ba

(1/1)

t1412:
hi chaps got a panasonic tx-l32s10ba the fault, is you switch it on backlight flashes up for a second, you can see the image then tv switches off with red standby light flashing slowly, my thoughts bad tube thanks for your time

shaun 

downunder:


Hi Shaun,


I take it that this is a CCFL backlit TV? Sounds like it's giving a Code 1 error message, 3 seconds between each blink, which is an invertor SOS. So it could be lamp short circuit protection, lamp open protection or arc protection, in short, a buggered CCFL, or it could be a fault on the psu, like dry joints or mismatched resistance on the inv. drive transformers. Something to be getting on with, anyway. Can upload service manual should you need it.                         


Bruce

t1412:
hi bruse thanks for the info i've solder the 2 transformers if you could load a manual that would be great thanks

shaun   

downunder:

OK, so I've uploaded it as TH-L32S10A, which is the Oz version of the TV.                    Bruce

Navigation

[0] Message Index