Forum > LCD TV forum

I need upgrade_loader. pkg for LED TV Philips 24PHK5619 / 12

(1/2) > >>

saud52:
I have a problem with the Philips  software, I hope you can help me ?   I need this service software:
"upgrade_loader. pkg"  for LED TV Philips model: 24PHK5619 / 12,  chassis:
TPM14.1ELA, serial number: FZ2A1448041524.
 Symptoms of failure: TV crazy behavior has an image, the menu can be called enter into it, but there can  no  in it either program the channels and andere programming . TV does not respond to commands with remote - simply blocks ! We can not turn off the TV with the remote.
 I have a similar upgrade_loader.pkg  for the TPN14.1ELA chassis and I tried with their upgrade. The upgrade has passed and the TV  with  remote control can off and turn on, but I do not have any pictures at all! I have a screen backlight .  New upgrade  software  does not pass through and there are no suitable drivers for the screen , so i do not even have an image and  the OSD on screen.  :33:

astracat:
hi
software for this tv on philips support site
regards
astracat

saud52:
Dear! I do not need ordinary firmware. I need a special Philips service software. This is not on this website.

jordan:
Download here-its for all model with chassis TPM141
https://www.file-upload.net/en/download-13346419/TPN141E10.3.20.128_upgrade_loader.pkg.zip.html

https://www.file-upload.net/download-13346419/TPN141E10.3.20.128_upgrade_loader.pkg.zip.html

saud52:
Poštovani g.Jordan! Ja već imam ovaj loader i njega sam upotrijebio u pokušaju da popravim moj TV. Nakon instalacije ovog loadera ja sam potpuno izgubio sliku na mom TV-u! Sada imam samo pozadinsko osvjetljenje bez ikakva sadržaja na ekranu. Nemam niti slike niti OSD-a ( Menu i ostalo). jedino što sam dobio je to da sada moj TV mogu sa daljinskim upaliti i ugasiti što ranije nisam mogao. Ja mislim da ovaj TPN141E10.3.20.128_upgrade_loader.pkg ne odgovara za moj TV. Ili sam možda nešto krivo uradio? Ja ne znam točno kako se ovaj loader koristi. Nigdje nisam našao uputstvo,imate li ga Vi možda? Ako imate pošaljite mi ga molim Vas. Ja sam jednostavno ubacio loader u USB stik i stik gurnuo u ugašen TV. Kada sam ubacio utikač TV-a u struju USB stik je počeo transfer i ja sam ga ostavio da blinka dok skroz nije prestao. Transfer je trajao oko pola sata mislim. Nakon toga sam TV isključio iz struje i izvadio USB stik pa sačekao pet minuta i  onda sam TV uključio u struju. Jesam li ispravno radio?
Molim Vaš odgovor!
Pozdrav za Sloveniju iz Bosne ,Saud

Navigation

[0] Message Index

[#] Next page