Forum > LCD TV forum

Phillips 40plf7605h

<< < (2/2)

EVILMRB:
Do you mean the main board Jordan. Thx.

downunder:

I agree with Jordan. Try removing one flexi between the T-con and display panel, and note the picture you get. Then refit that flexi and remove the other one. If you can get a clear picture or white screen on one half (the right half, I suspect), but not on the other half. then your display panel is kaput.                                          Bruce

EVILMRB:
When I remove the flex I get white on one side but still with the lines, and on the other side it still looks like its missing a colour in places. If it is the screen too bad, I only got it out of the local dump anyway.

Navigation

[0] Message Index

[*] Previous page