Forum > LCD TV forum

Bush DLED32287HDCNTDFVP Picture Upside down

<< < (2/2)

seagate2020:
Hello astracat,

Yes you are correct the screen panel does not match the firmware please see photographs. i personally think the main board has been replaced.
I have never done a firmware on a tv but have done on other devices.Also I do not know where to source the firmware code and how to load it.Any help would be appreciated.

Thanks Dave
   

seagate2020:
main AV

astracat:
hi
updates are from the manufacture its made by vestel send them an email with model and serial number they are quite fair with suppliying firmware if its still available ,unzip it onto a usb stick put in tv before plug power up and it should do its job ok
if not available some one would have to take it from another tv .sorry i do not have it or you can replace main board from another supplier
also some models have a second service page via same number while in it service mode (ie menu 4725) but do not know if that applies to your tv
regards
astracat

seagate2020:
Hello,

Thanks for the reply. Managed to source, to what I think is the correct board on eBay. MAIN AV BOARD 17MB110P 10105400 23455886.
The 23455886 seems to correlate to the correct panel. I'll let you know the results when the board is fitted. I have also found this link if it is of any use. Provides the firmware by email.

https://www.ebay.co.uk/itm/17MB82-17MB95-17MB97-RECOVERY-SOFTWARE-FIRMWARE-TOSHIBA-BUSH-POLAROID-PANASONIC/164170704055?hash=item26395624b7:g:T7wAAOSwOhda46ga

Regards Dave

fix2003:
I guess he has access to the Vestal service portal and could probably get any off us, any vestal file we needed

Navigation

[0] Message Index

[*] Previous page