Forum > LCD TV forum

Philips 42PFL5008D/56/Restart problem

<< < (3/4) > >>

P.R.Gore:
Sir after this  procedure screen showing panel id number. Please take a look at attached photo. Panel id showing 234, should I change it to 50? Please guide.
Thanks.

jordan:
FLIPPED OVER PICTURE
Procedure:
Enter factory mode (press Menu/Home, 1, 9, 9, 9 and Back/Return buttons) then turn Panel Flip option to off.

jordan:
Unique display panel code (3 digits) location
Every display has a unicque display code (3 digits). This code should be written on a sticker, in the lower corner of the housing or behind the Philips logo, in the right corner (on the apppliance label).

jordan:
How to program the option code of the LCD display panel.

1. Press 0, 6, 2, 5, 9, 8 and MENU buttons followed by the 3 digit display code
2. Restore factory defaults.

P.R.Gore:
Sir, since set was kept upside down  it looked vertically flipped picture. Actually pic is ok. I set panel id to 173 which is mentioned in ser manual. It made no difference. Err display is still there. Related with Cl+  there is option in ser mode. What it shows I will send images. Please take look.

Navigation

[0] Message Index

[#] Next page

[*] Previous page