Forum > LCD TV forum
Technosonic LCD3251
tv tony:
Over the last few months there have been several reports on the Technosonic LCD3251. Most of these are stuck in standby, we are now able to supply the e-proms ready programmed, all enquiries to tv-tony, UK only. Thanks for reading!
paradoxni:
Would this include TV not powering on, no standby LED? Or is this a seperate fault?
tv tony:
Sorry no, The chips i supply are to cure the stuck in standby, BUT the earlier psu's fitted in these are unreliable, usually its the standby 5v rail that fails, is yours the philips psu, light in colour or the earlier one, if early u will see that the 5v chip has a hole in it, but just dont change the ic, it will pop it, i can repair your psu if u wish.
regards
tony walker
SCOUSER:
ok tony how much are the e-proms i've got a medion lcd tv model number md 30112
chassis number 04TA0691 the led flashing after i put 5 new capacitor that were bulged also change fsd 200 chip and the 2 zenner diodes still no go. do you think its the e-prom that is the problem thanks
shaun
tv tony:
hello alun, re your lcd3251, its certainly crozzled, but yes, we can do it, the only problem is that the pcb can become conductive where the diode and wire link is, but we can sort that, £35.00 plus p&p.
Navigation
[0] Message Index
[#] Next page
Go to full version