Forum > LCD TV forum

BUSH LCD37TV016HD LCDTV GOES ON STANDBY ONLY ###HELP###

(1/2) > >>

stylesclash2k8:
Ive had my 37" Bush LCD for 14 months now and now when i plug it back in, the blue standby light appears but then it wont turn on it just goes back to standby, no picture no sound, occasionally it will turn on fully but after few mins turn itself back off and dont go back on, can any1 tell me how fix this problem cos i cant afford 2 goout and get another cos money dont grow on trees(if it did id plant a forest lol)

watteau:
Hello,
This Bush model uses a PROVIEW chassis, it is possible the power-supply
is at fault (dried up electrolytics etc.).
Try https://www.chsinteractive.co.uk, for parts for this model - the power supply
is listed at £90!
Sorry can't be more explicit, as we have no service information on these chassis's.
Good Luck!
John.

tv tony:
if you have no joy with psu we do them, cheaper than £90, just £64.95, but as previous writer said electrolytics are fav.
tony walker

p0dster:
i have same tv only just 12 months old very simular fault except nothing but a ticking noise coming from the tv when mains power is applied no lights that i can see on the front, i suspect the psu. would ask tv tony if there is any chance of a link to the site for a replacement one @ £65.00 or any further help ie schematics of the psu
here is a picture of the psu in my set attached

it is a Bush
LCD37TV016HD Pcb PSU PROVIEW MLT198H

regards
alan

sathacker:
I have the same TV which came with the same fault but now I come to check it I find it is now dead. The onboard fuses are ok but it does occasionally blow the mains fuse, checked switches etc and ok.

Have looked for replacement PSU only to find it obsolete/discontinued. No obvious component stress, would
appreciate a pointer on this or where I may find a PSU.

Navigation

[0] Message Index

[#] Next page