Forum > LCD TV forum

LG LCD TV (model RZ-32LZ55) stuck in standby..

(1/1)

maktv:
Hi,

I've got this LG RZ-32LZ55 which is stuck in standby.

The powersupply looks ok.. outputs (5v, 12v, and 24v) are all fine.. and I've already changed the 7 electrolytic capacitors on the psu (which had all drifted a bit).

Any ideas?

Thanks

ukez:

--- Quote from: maktv on October 30, 2008,17:16:36 ---Hi,

I've got this LG RZ-32LZ55 which is stuck in standby.

The powersupply looks ok.. outputs (5v, 12v, and 24v) are all fine.. and I've already changed the 7 electrolytic capacitors on the psu (which had all drifted a bit).

Any ideas?

Thanks

--- End quote ---

Did you manage to establish what the problem is , i've got the exact same problem with my tv.  What capacitors did you need to change on your mains power board?      I've noticed a blown resistor on my one but im not sure whats caused it to blow.


Any ideas??????

tv tony:
hello, does the led status alter when you hit the on button
tony walker

samanaboy:
if you have those voltage try to mesure al the voltage inductor that are near the conectos marked as L
yor fault is on the main board... :dry:

tv tony:
hello, does pwr led status alter when pressing standby on r\c.
as an extra these have a 6v line which is unreliable, derived from the psu
tony walker

Navigation

[0] Message Index