Forum > CRT TV forum

TOSHIBA-50VR9UM rear projection

(1/1)

alish:
Hi to all !
TOSHIBA-50VR9UM rear projection
picture with distracting lines .i detected that by heating the module MDF S03 resolve the problem.so i replaced 4 caps the others ok it dosn't help .what could be the fault please help thanks !

yaser:

--- Quote from: alish on March 08, 2009,13:07:38 ---Hi to all !
TOSHIBA-50VR9UM rear projection
picture with distracting lines .i detected that by heating the module MDF S03 resolve the problem.so i replaced 4 caps the others ok it dosn't help .what could be the fault please help thanks !

--- End quote ---
This failure is frequent in the dry welds Modiol must be re-welding the full Board Lalai special large IC-print, if you need to be sent to the service manual ok

ex ttg:
Hi
You need to refloat the ic's in the dfs module.Not so easy with a 40w weller and not reliable.If you're in the uk,sers in sale(manchester)  do them.If you haven't got a decent hot air device i wouldn't bother trying.
Good luck
Nick

alish:
Thank you for your replies !

alish:
replaced 15 dry capacitors in the module .now everything is ok.
list of these capacitors :
C151/C150/C184/C187/C210/C361/C341/C321/C438= 22micro
C152/C114/C288=100micro
C206/C215/C253=47micro

Navigation

[0] Message Index