Hi
Anyone out there with experience of one of the 4a fuses on y-sus panel blowing(FS2).The psu is the cause.Half of the 3300uf 10v caps have domed.Is there any chance that I won't have to replace the y-sus after repairing psu as i don't think customer will stretch far over £200 and the cheapest I can find this board is £150 ex-vat from grandata.If anyone has had this fault and repaired the y-sus to component level any help would be much appreciated.
Topic: lg pdpx3(42pc1da) fuse blown on y-sus (Read 5108 times)