Forum > CRT TV forum

Technosonic LCD3251 Reddish Screen after dismantling.

(1/1)

Adge:
Hi All

I have a Technosonic LCD3251 32" TV. I repaired a faulty 3.5mm audio jack socket (PC sound input)and replaced on Input(s) circuit board. No other repairs were attempted. I removed most of the connectors on said board and replaced as found. Since reassembling I have a poor quality reddish picture on all inputs. I can see no obvious problems i.e.missing connectors, broken wires etc. The sound is OK.

Has anyone any suggestions as to where I go next?

Many Thanks

Adge   

tv tony:
usually caused by rough handling of the lvds cable, (the cable that supplies power and video to the display)
40 in stock

tv tony:
hello, the lvds cable is very fragile, i am confident that this will cure your problems, but there are two types, at the pcb end one is a thin flat one that plugs into j21, the other goes into j102, we do both.

Navigation

[0] Message Index

Go to full version