Forum > CRT TV forum

Panasonic TX32DTX1 E10D chassis

(1/1)

Turnip:
Hi folks,

   Have one of these where set will immediately revert to standby. With patience, and much button pressing, set will come on and perform normally - no amount of bashing or board twisting causes a flicker.

   Only link found was Highlandelectrix where it is suggested to resolder everything - big job. All usual suspect hot areas resoldered but no improvement. Thinking of power supply secondary caps but initial heating makes no difference.

   Any thoughts - Chris.

sparky:
hi
i had a fault same as above tv many months ago on a philips
28 widescreen it turned out to be the relay, by trail and error when relay split
open the contacts were very tarnished
replaced cured the fault just a thought
sparky

Turnip:
Hello, and thanks Sparky - good thought - Chris.

DesperateHousewives:
Thanks, sparky!

veromade:
Thanks, sparky!
you really helped me

Navigation

[0] Message Index