Author Topic: Panasonic TX32DTX1 E10D chassis (Read 5291 times)

Turnip · « **on:** July 29, 2009,08:56:10 »

Hi folks,

Have one of these where set will immediately revert to standby. With patience, and much button pressing, set will come on and perform normally - no amount of bashing or board twisting causes a flicker.

Only link found was Highlandelectrix where it is suggested to resolder everything - big job. All usual suspect hot areas resoldered but no improvement. Thinking of power supply secondary caps but initial heating makes no difference.

Any thoughts - Chris.

Mulja tv repair portal · « **on:** July 29, 2009,08:56:10 »

sparky · « **Reply #1 on:** July 29, 2009,10:12:32 »

hi
i had a fault same as above tv many months ago on a philips
28 widescreen it turned out to be the relay, by trail and error when relay split
open the contacts were very tarnished
replaced cured the fault just a thought
sparky

Turnip · « **Reply #2 on:** July 30, 2009,03:51:54 »

Hello, and thanks Sparky - good thought - Chris.

Mulja tv repair portal · « **Reply #2 on:** July 30, 2009,03:51:54 »

DesperateHousewives · « **Reply #3 on:** August 04, 2009,03:17:21 »

Thanks, sparky!

veromade · « **Reply #4 on:** August 14, 2009,05:19:11 »

Thanks, sparky!
you really helped me

Mulja tv repair portal · « **Reply #4 on:** August 14, 2009,05:19:11 »

Mulja tv repair portal

News: