Forum > PLASMA TV forum

Nec PX-42VM3G service manual wanted

<< < (2/2)

michael first:
Hi,not signed up with Euras,sorry;maybe the leads to the control board must be connected,'cos if not ,the PSU is not driven by the micon. I haven't the SM of this specific chassis,but usually the PSU drawings aren't supplied.

carrera:
I have an NEC VP4g, which has a similar power supply. Mine would work for a few seconds before switching off & going to standby. Repair was effected by replacing the three large capacitors.

If you don't have all the connections to the board it will not switch on & go to standby

waxhead:
thanks for help guys.

sorted it now.i replaced the input board and all is working great

Navigation

[0] Message Index

[*] Previous page