Forum > PLASMA TV forum

FUJITSU PLASMA----FAULTY FAN

(1/2) > >>

tv john:
Hi guys,I have a Fujitsu PDS 5002E-S  50" plasma with a faulty fan. This is where the frustration begins,because this plasma has 4 fans and the set cuts off [showing 'condition 1 ' first]. Now the 4 fans have seperate plugs,so it's easy to detect which is faulty. If I discon. the plug it still cuts out.
I don't know who makes this plasma,but some edge connectors are marked-TNPA191A.

Can anybody help ?      thanks   tv john

tv tony:
hello, its not getting the reference pulse from the faulty motor, i take it they are 3 wire motors, 1 is neg, 1 5v, the other when the fan is running should be about 4v, thats if they are 3 wire, good luck
tony walker

tv john:
Thanks for the replyTony,yes it has 3 wires per fan. I was thinking that if I linked the faulty motor cons. in parallel with a good one ,then sensor might get required pulses(back to vcr days).
Plasma is in cust. house.  Any thougts about this Tony ? Does anybody know if one can be found in the UK ?

tv tony:
bang on, by process of elimination, works for lg anyway, if you can post piccie of fan i am sure we have something

tv john:
Hi Tony,The customer stays 25miles away, so a photo is out. The fan is about 4 inch square,about 1 inch deep and has the following info on it -12v 0.14amp,NIDER,BETA SL. model D09A 12PH 03B and may have no's MC 127W 27M (can't remember where I got this no from).
The fans are held in ln place by a spring clips and the 4 sit across the top of the plasma.
It would be great if you could supply one.

Thanks ,John.

Navigation

[0] Message Index

[#] Next page

Go to full version