Forum > LCD TV forum

Sharp LC32AD5EBK LCD TV

(1/3) > >>

brian:
 :sad:
Hi again,
Anybody had one of these, no pic. or sound but when connected to mains supply the standby light goes straight to green, irrespective of standby switch! also no remote operation. p/s voltages seem to be there, as far as I can tell, also 24v supply up to inverter is present.
I strongly suspect software problem but have no info.
So, hoping somone might advise
Thanks again
Bri.
p.s. I hate eproms, or is it just me?

daz:
try to enter the service mode as you swtich the tv on and see if anything changes.

brian:
 :unknw:
Hi Daz,
Not sure for the correct procedure to enter service mode, except found some info.from internet search suggesting holding vol. down on the set and pressing 9 on remcon.at the same time
tried it but did,nt work
Anyway thanks for the help.
Bri.

michael first:
Hi,
swich on the mains button while keeping pressed vol- and input keys;sevice mode is confirmed by the k letter on the screen;while the tv set is still on press vol- and ch- keys to get the service menu;hope it works.

brian:
 :unsure:
Hi
Thanks Michael for the suggestion, but still no joy, set refuses to show any desire to start up, except for the green led!!!
So frustrating!
bri.

Navigation

[0] Message Index

[#] Next page