Author Topic: humax lgb-19dzt no pic (Read 6092 times)

waxhead · « **on:** September 02, 2009,05:47:37 »

i have been given a Humax lgb-19dzt

it has a no picture fault and doesnt respond to the remote control. it sometimes quickly flashes a blue screen when you power it up.

any help would be great

thanks

Mulja tv repair portal · « **on:** September 02, 2009,05:47:37 »

tv john · « **Reply #1 on:** September 02, 2009,16:14:00 »

The only similar fault I could find was for a 17 inch model.Tyr soldering inverter tx's and check earth screws. You never know.

tv john.

Turnip · « **Reply #2 on:** September 03, 2009,10:57:25 »

Hi Waxhead,

Note from earlier posts on this model, troubles you describe might be P/S caps, or three regs on the main board.

Alll the best - Chris.

Mulja tv repair portal · « **Reply #2 on:** September 03, 2009,10:57:25 »

waxhead · « **Reply #3 on:** September 03, 2009,14:21:13 »

Quote from: tv john on September 02, 2009,16:14:00

The only similar fault I could find was for a 17 inch model.Tyr soldering inverter tx's and check earth screws. You never know.

tv john.

someone has had a ago at fixing it or something before. because there is a earth wire soldered to a earth point on the inverter but the wire is just hanging there

waxhead · « **Reply #4 on:** September 03, 2009,14:22:32 »

Quote from: Turnip on September 03, 2009,10:57:25

Hi Waxhead,

Note from earlier posts on this model, troubles you describe might be P/S caps, or three regs on the main board.

Alll the best - Chris.

thanks chris

i will take a look at the posts

cheers

waxhead · « **Reply #5 on:** September 29, 2009,14:07:14 »

nope caps are fine on the psu. stuck on this one and another humax with a similar fault :wallbash:

Mulja tv repair portal · « **Reply #5 on:** September 29, 2009,14:07:14 »

Mulja tv repair portal

News: