Forum > LCD TV forum

Evesham ALQEM37WX1080P TV

<< < (5/5)

sparky:
hi
some people will say they fit and work(sold as seen)
but the reading of there terms mean you have no
chance of getting your cash back
sparky

Mac0001UK:
Hi Theo,
Thanks, I guess I will just have to suck it and see.
Cheers,
Mac

theo laird:
The 4006 type could probably be made to work. The end pins are the same as all Darfon boards. The middle ones look different. 4006's have a slightly different arrangement even though the winding would be the same. A pic of the board would be good to see the connecting pads of the pcb with the transformer removed. The logic here is, 8 connections on transformer, 6 coil ends, so 2 might be just for anchorage purposes and not needed. From your pic, 2 of the centre pins are no connection. Measure the resistance between the 4 centre pins (on the panel) with the transformer removed, if you get around zero ohms, it's more than likely the 4006 type will work without any wiring modification to the pcb.

Navigation

[0] Message Index

[*] Previous page