Forum > CRT TV forum

Component identification

<< < (2/3) > >>

elamskroy:
Thanks Norman
Yes i have done a bit of reasearch and there are 2 fets that are suspect, i have tested them both and one does have a short.

Cheers
Vic

elamskroy:
TV now up and running  :clap:

Thanks for your help folks :thumbup:

Turnip:
Hi Vic,

  Congratulations on the repair, and for the benefit of all - what TV was it that you mended, sounds a bit Sony to me ?

  Curious - Chris.

elamskroy:
Hi Chris

It was infact an old Hitachi 32" PD5200E Plasma, the picture quality is amazing for such an old set hence worth the fix.

I have another PD5200E with the same symptoms, i have replaced the 10ohm resistors and checked the fets that had blown on the fixed set but they where ok, so still looking for the short  :wallbash: lol

Regards
Vic

norman:
Hi Vic, The failure of these resistors on the Hitachi plasma is a known fault. If you can't find a short replace the resistors and hope for the best. Norman

Navigation

[0] Message Index

[#] Next page

[*] Previous page