Forum > CRT TV forum

PANASONIC TX 32PD30 GP1 Chassis

(1/2) > >>

brian:
Hi.
Got one of these with the STR6656 blown apart, also 2.7ohm 7 watt ballast resistor o/c. Before I replace these Has  anyone come across this before and do I need to replace anything else?
Because i,ts so big I,ve left the set at cust. home.
Really appreciate some help
Bri.

norman:
Hi Bri, If my memory serves me there are four diodes that go s/c I think they are zeners and are all together next to the STR and the origonal fault is usually caused by dry joints on the smps transformer. Hope this helps, Norman

brian:
Hello,
Thanks, Norman will look into it and keep you posted
Bri.

brian:
Hi,
Sorry to be a pain Norman, but any chance you can remember values and circuit refs.
Have checked chs. with no luck.
Many thanks
Bri.

norman:
Hi Bri, I will have a look tomorrow for the info, I think I have it written down somewhere. I will try and send you the manual by email. I don't know if the file is too big to send. Cheers, Norman

Navigation

[0] Message Index

[#] Next page