Forum > LCD TV forum

Samsung LE40R88BD Clicking Relay

<< < (15/30) > >>

daz:
CARNT BELIVE IM GOING TO ADD TO THIS POST BUT HERE GOES

this is a bit of a tip for all my telly basher colleagues out there, I have noticed if the eeprom is duff and you don’t have a new blank one in stock you can take one off another board (doesn’t mater which model) and the set automatically overwrites it, also if you fit the duff one to another board (samsung) it will often overwrite it and get it working again.

give it ago, might save a few quid
daz

ps. still hoping ady ade logs on and deletes this topic.

sinclairtv:
Sorry but when you can get an IC fron CHS for 67p, why would you want to put the duff one back in. Surely all TV repairers should keep 1 in stock. Last time I oredered I got 10 so that should keep me going for a while.

sparky:
hi
never seen ic for 67p at chs even for lots of 10

daz:
my point being IF you ran out of stock you could take a  good eeprom off a duff samsung pcb, doesn’t matter which model the pcb came out of as long as its the same eeprom and the set would automatically reprogram the eeprom. handy if the customers in a hurry.
as for putting a duff eeprom into another board, sometimes the eeproms aren’t duff just very badly corrupted, putting them into another samsung sometimes resets them and they work fine. WASTE NOT WANT NOT.
perhaps you could post the chs part code that gets the eeproms so cheap?
daz

Turnip:
Hi Daz/Sparky, et al,

Feel at bit left out as have never seen one - maybe tomorrow, and those 67p chips seem encouraging - Chris

Navigation

[0] Message Index

[#] Next page

[*] Previous page