Forum > PLASMA TV forum

Philips Plasma 42PFP5532 (LC7.2E PA) - Error Code 2 ?

(1/1)

E Parton:
Hi Friends ..
I hope one of you guys can point me in the right direction ..
The set attempts to power up ..relays click ...but VS to Ysus and Zsus panels are never established ..
No fuses blown ..and no visible signs of damage ..
After intitial attempt to start the set goes to sandby ...but the error code buffer flashes the following :-
One long flash :- start of buffer read ?
2 short flashes = error code 2 ..
I have no service manual or info for this set ....but the LC7.2E LCD manual ...which I do have indicates this to be a lack of or low 12Volt line ..
This probably means something totally different in the Plasma version ..
Can anyone help me get started with this repair..
Am I looking at a faulty PSU board ..or something more sinister  & expensive..
Any help ..or service info would be greatly apppreciated.

rgds
Evan

E Parton:
Additional info ..
The set is fitted with S42AX YD04 Plasma Panel ..
Protection LED 8001 (Green) Lit and not blinking after relays click and attempted startup ...
No VS supplies to Ysusor Zsus ..
At the moment I'm suspecting the psu itself ...but don't want to make a mistake as they are not cheap ..
rgds
Evan

jurq:
Did you try this http://www.tv.quuq.org/forum/index.php?action=dlattach;topic=701.0;attach=96 ?

Navigation

[0] Message Index

Go to full version