Forum > LCD TV forum

Technosonic Lcd 3251

<< < (2/3) > >>

tv tony:
hello brian, correct chip arrived, e-progged and on its way back, the new me, i hope, prompt!!!!

brian:
Hello Tony,
Brilliant, thanks mate.
Bri.

brian:
Hi Tony,
 Sorry for the late reply,
 have fitted chip and all up and running.
So thanks again.
Bri.

brian:
Hi All,
Sorry to say, this set came back into the workshop today Mon.25th Jan.
And is stuck in st,by. The weird thing is sometimes it will power up as normal, but only from the remote control,it never starts from standby button. And all is o.k. until switched off/and then just sits back in st,by. Have replaced/ checked all elect.caps in p.supply.Also tried heating with hairdryer all to no effect.
The p.supply volts. all seem o.k. i.e. 24v,12v,5v, and3.3v
and stay the same when set is running!
As you can see from previous posts Tony kindly reprogammed the eprom for me, and set has run well until now
Help!!
Bri. :wallbash:

tv tony:
hello brian, ill post you one from a stock set as soon as i can, dammed sets

Navigation

[0] Message Index

[#] Next page

[*] Previous page