Hi folks,
Had one of these and noticed a Quuq reference to C107(47/50) causing revert to S/By. Replaced that together with C108(3.3/50) and C117(10/50) as they were all in the same warmish primary area even though ESR and capacity seemed OK - but no start.
Noticed P/S was pulsing - removed plug to main - P/S with steady supplies. Found no S/C on main so
checked C109 and C110(both1000/6.3) found ESR less than 0.3R and capacity OK. Replaced them with 1500/10 - set OK - Chris.
