Forum > CRT TV forum

toshiba 32ZP48

(1/3) > >>

geoff4e:
Hi Guys new to site hope you can help
Toshiba TV 32ZP48P Problems are grainy and horizontal lines at start, picture then clears for short while before loss of picture just multi -coloured stripes like bar code effect, sound remains ok then after about 3mins TV shuts down and goes to stand by. Any ideas please?

tv john:
You will require a new DFS module which has 30/40 pins to be desoldered before removing.
If your not a tv engineer,then get one to do the job.
John.

mulja:
Agree with John
MDFS03 module faulty must be changed

http://www.chsinteractive.co.uk/electrical-components/misc/mdfs03-toshiba-module-scan-converter-dimensions-l-114mm-h-88mm-w-16mm-silver.htm

geoff4e:
Wow thanks for the quick response Guys.
 The price of the replacement part is a bit steep and with labour on top I wonder if it is worth doing.

daz:
give the Toshiba customer services a ring, its a common fault so Toshiba will supply the part for free, which is almost unheard of in this biz, they usually sent it to the engineer doing the repair so all you pay is a callout and fitting charge.
Hope this helps
Daz

Navigation

[0] Message Index

[#] Next page