Author Topic: philips lcd controller wanted  (Read 7366 times)

0 Members and 1 Guest are viewing this topic.

tomaboy

  • Jr. Member
  • **
  • Posts: 10
    • Email
philips lcd controller wanted
« on: February 27, 2010,15:23:43 »
Hello!

I'm looking for t-con (lcd controller) board for my philips 32pf3320 lcd tv.
You can see it here http://obrazki.elektroda.net/37_1244459246.jpg
Pls inform me if you can help or you know where can I find that. Thanks in advance.

Mulja tv repair portal

philips lcd controller wanted
« on: February 27, 2010,15:23:43 »

pol-uk

  • Full Member
  • ***
  • Posts: 61
    • LCD and PDP TV Parts
    • Email
Re: philips lcd controller wanted
« Reply #1 on: February 28, 2010,04:48:27 »
I think I've got it the last one. But try to describe fault with this TV. Do you have only black screen with sound and T-CON looks good ??
Cheap TV parts, remotes to all....

www.tvparts-online.com

REGARDS

tomaboy

  • Jr. Member
  • **
  • Posts: 10
    • Email
Re: philips lcd controller wanted
« Reply #2 on: March 04, 2010,14:50:58 »
Hi!
Meanwhile one of my friend replaced the only and faulty fuse for zero-ohm resistor on t-con board. The picture is white now and I can see the osd menu and channels foggly. I tried to find error codes by means of service mode and it showed: ERR 0 0 0 0 0... No fault according to SDM even though picture isn't perfect. Maybe I should find some wrong capacitors on t-con or small board that located edge of screen....What do you think?
« Last Edit: March 10, 2010,03:40:43 by tomaboy »

Mulja tv repair portal

Re: philips lcd controller wanted
« Reply #2 on: March 04, 2010,14:50:58 »

pol-uk

  • Full Member
  • ***
  • Posts: 61
    • LCD and PDP TV Parts
    • Email
Re: philips lcd controller wanted
« Reply #3 on: March 08, 2010,10:23:32 »
Put a photo we will think about it. Regards
Cheap TV parts, remotes to all....

www.tvparts-online.com

REGARDS

andrewiso

  • Guest
Re: philips lcd controller wanted
« Reply #4 on: March 08, 2010,17:55:05 »
Hi,
I have the same problem with an 32PF3320.
The used Panel is a Quanta QL21HD02.

The TV has no picture, audio and backlight are OK
No Videotext and onscreen display or menu.

I also found a bad fuse F1 in the input of the T_CON board.
I replaced it.
There is still the same problem. I found no bad parts yet.
Any idea??

tomaboy

  • Jr. Member
  • **
  • Posts: 10
    • Email
Re: philips lcd controller wanted
« Reply #5 on: March 09, 2010,12:40:59 »
Put a photo we will think about it. Regards

You can see the small panel what I mentioned below of page here:
http://monitor.net.ru/forum/philips-32-lc43e-qd32hl02-info-305578.html
Actually I don't know where should I look for additional bad parts if this panel is working well...  :wallbash:



Mulja tv repair portal

Re: philips lcd controller wanted
« Reply #5 on: March 09, 2010,12:40:59 »

 

download
download
download
download