lc-27w6s

[sparky]

hi
have picked up this tv sound ok pic blanks out backlights go off
after coulpe mins switch on/off pic back on
have checked 24v ok 5v ok measured transformer ok
soldered pcb any suggestions don't think inverter faulty

[Turnip]

Hi Sparky,

Have had a couple of Sharp that did much the same and in both cases resoldering invertor drive chips did the biz  - Chris.

[sparky]

hi
just finished soldering still same i am going to change transformer one
at a time to see if its faulty

[Turnip]

Hi Sparky,

Just a thought, what's the invertor - mine were both 32" - Chris.

[sparky]

hi
its got 7 transformers
mod 4H.V0708.001?/E5
 i bought it at the car boot includes remote
cust said pic blanks out worth £15

[Turnip]

Hi Sparky,

A Sunday well spent - Chris.

[sparky]

will be if can get it sorted also neighbour had accident 37" matsui
child throw frisbee for dog it hit the screen ,screen has had it they are not insured
they gave it me for spares  good day or what
sparky
also lexsor same model lc 27w6s

[pol-uk]

Maybe yo've got invertor OK in some case i found few modesl with the same screen and invertor which have faulty CCFL Lamp inside screen. Regards

[sparky]

hi
just trying to decide if screen or inverter faulty
sparky

[pol-uk]

You should get there an V270W1 or V270B1 screen inside. Try to change only glass (lcd screen only) to another whole backlight from faulty (smashed) screen. In this case it's very easy. Reagrds

[In_Focus]

Hi.
Change the two 1000uf caps and the 47uf beside the chopper ic first. These are the most common causes of start up problems on this Harwa munufactured set.

Beware!!! if you get it going and sell it on, HDMI opertaion is very unreliable, usually lockup occurs after a few hours use. No support from the manufacturer.

[sparky]

hi
the psu is ok its not a start up fault