Forum > LCD TV forum

LOGIK LCXW32HD1

(1/2) > >>

Dansford:
Hi, I have a LOGIK LCXW32HD1 LCD TV which is dead. Every internal fuse installed is blown. I have replaced the FSD200 on the power supply board but it continues with the same problem.

Any input would be much appreciated!

Thanks in advance

Dansford

Turnip:
Hi Dansford,

There's usually more than that exploded FSD200 to replace. Most suppliers have a kit with lots'a bits - done some myself. Phoenix kit from Grandata, Wiltsgrove or wherever  - OK - Chris.

tv john:
Hi guys, check mains smoother as well.

John

michael first:
Hi,this could help.Good luck.

Dansford:
Hey, I replaced the smd bridge rectifier on the underside of the board but still same problem. As far as I am aware the FSD200 and DBS106G bridge rectifier are the common source of blowing fuse. I have tested the other components suggested by the repair kit but they all seem functioning.

Any more input would be appreciated !

I'll probably have to buy a repair kit - does anyone know which sites are good for repair kits, I have found a few but they cost more than the TV  :wacko:

Navigation

[0] Message Index

[#] Next page