Forum > LCD TV forum

Goodmans LD2655HD blows power board fuse

<< < (3/3)

In_Focus:
Beware, replacing a 17PW15 with the newer 17PW20 may need a modified wiring harness as PL805(?) has an extra pin. Before you order a new PCB check the bridge rectifier first, its just above the part no. It could be an easy fix.

Whoops, sorry my attempt at an edit ended up as a double post. :oops:

hamish001:

--- Quote from: In_Focus on April 09, 2010,14:14:49 ---Beware, replacing a 17PW19 with the newer 17PW20 may need a modified wiring harness as PL805(?) has an extra pin. Before you order a new PCB check the bridge rectifier first, its just above the part no. It could be an easy fix.

--- End quote ---

I checked out the cabling change, as I'd seen a few mentions of that. But CHS says that the harness is needed for the (Older) 17PW15-8, but not for the 17PW15-9. The PDF says that the cabling is identical for the 17PW20.1 and the 17PW15-9.

H

sparky:
hi
it shoud fit without the harness try wiltsgrove first cheaper
than charles hyde

Navigation

[0] Message Index

[*] Previous page