Author Topic: panasonic TH37PX70B  (Read 5819 times)

0 Members and 3 Guests are viewing this topic.

g*****s

  • Full Member
  • ***
  • Posts: 77
panasonic TH37PX70B
« on: December 06, 2011,14:37:25 »
This set when switched on,relay clicks then standby flashes 12 times.Any help would be great. :c017:

Mulja tv repair portal

panasonic TH37PX70B
« on: December 06, 2011,14:37:25 »

g*****s

  • Full Member
  • ***
  • Posts: 77
Re: panasonic TH37PX70B
« Reply #1 on: December 07, 2011,17:21:21 »
got hold of some service info.12 flashes of standby light is PA board sos.PA board controls, DC-DC converter,speaker out,audio Amp,fan control. Good to hear but where do i go from there.

M RICH

  • Newbie
  • *
  • Posts: 4
Re: panasonic TH37PX70B
« Reply #2 on: December 08, 2011,04:56:14 »
Hi
  The panasonic blinking guide is for a starting point only so it likely that the fault is going  to be on another pcb rather than the PA board (I been caught before like this!).It is worth checking perhaps the audio supply circuitry which orginates from th P board (power supply) & ends up on the H board.It is possible that the PS pcb is faulty but I would definetly check those supplies lines to the audio stages first    regards Mike

Mulja tv repair portal

Re: panasonic TH37PX70B
« Reply #2 on: December 08, 2011,04:56:14 »

M RICH

  • Newbie
  • *
  • Posts: 4
Re: panasonic TH37PX70B
« Reply #3 on: December 08, 2011,04:57:59 »
 I meant PA board not PS board!!

g*****s

  • Full Member
  • ***
  • Posts: 77
Re: panasonic TH37PX70B
« Reply #4 on: December 08, 2011,16:14:57 »
M RICH thanks for taking the trouble to reply,But im still lost for how to solve.Its me,im very new to plasmas,but trying.With help from people like you,who try to help.   :c017:

Mulja tv repair portal

Re: panasonic TH37PX70B
« Reply #4 on: December 08, 2011,16:14:57 »

 

download
download
download
download