Forum > LCD TV forum

philips 32pf5521d standby no power

<< < (2/5) > >>

blackmail:
this is the psu thanks

Turnip:
Hi,

Looks like a PLCD 190 C1 - Have no reported probs, Quuq chaps to remedy, hopefully, perhaps -  Chris.

blackmail:
I cannot find any reason why this tv will not switch on I have checked all the power sources an they seem to be fine

chrissie jones:
check caps c537 and c100. value for both are 100n k630.

Ramis101:

Did you fix this ?
I would appear to have exactly the same fault.  plug in - led briefly flashes green then goes red.
remote input seems to not work, but can't really prove that.
push power button on set, red led goes off but does not turn to green.

I've checked voltages all over the set and everything seems fine - and i checked the caps the last poster mentioned, both within tolerance.

anyone with any ideas appreciated.

(yes the psu board is a PLCD 190 C1 and all seems well there. i've measured all diodes and caps and switching devices)

Navigation

[0] Message Index

[#] Next page

[*] Previous page