Forum > PLASMA TV forum

philips 42pfp5532d/5 help

<< < (4/4)

snopy44:
thanks daz for the repy have had a lookat that link and it is for a lcd not plasma do you know were on the board the audio ic is and a board ref number as this is what i have bin asking for from the start and thanks daz top guy

daz:
hi, can you confirm the model no and chassis no, both on the white sticker on the back of the set, the chassis no is in a small box and starts with a bold letter S, so i know exactly which set were talking about. the main av pcb that you have changed can be used in both plasma and lcd sets, hence the need to make sure the software is correct. get me the chassis no and ill be able to tell you which is the audio chip tommorrow.
daz

snopy44:
thanks for that i will have to take the tv off the wall to look it up just as a mater of intrest then if i was to find the chass number could i up date the software on this board to make it work and if so how hard is it to do and is there any way that you could explane it to me in lay men turms and thanks daz :thumbup:

michael first:
Hi,maybe the new board was taken from a tv with a different BOM,so you have to write into the tv's memory the right display option code;look at the small label on the bottom corner of your tv,you'll see a three digit number,then with the tv on,digit on the remote '062598MENUxxx' where 'xxx' is the above mentioned number;after, the tv will go into st-by if everything was done correctly.Turn the tv on and see if the image is right.Hope it works.

snopy44:
hi thanks for that did as you sad put the code in 062598 followed by menu and 083 that is stated on the paper lable but no joy no mater what i do i don,t seem to be having any look there must be somthing that can get it to get it to work right :loool:

Navigation

[0] Message Index

[*] Previous page