Forum > PLASMA TV forum

daewoo -DP42SM

<< < (2/3) > >>

WILLYAM1:
thanks brainstorm.
after  well and deep checking in y sus  i made the follw steps.
1-i took out(desemble) the ydrive (scan)42v-psh30-00(high-upper)and got:
upper screen is black and lower screen with very good and clear pic..
2- took out the y drive 42v-psl30-00(low-down)and got noisy and not clear  like photos above.
i think the problem is upper y scan.
i will send photos .
 my main conncern is  thin vertical in upper and lower screen.
any aidia????

brainstorm:
Hi

Yes william i agree you have got a faulty upper Y drive board fault, you may find just replacing that will cure the fault. But the thin horizontal line may indicate a screen defect, but you will only know if you fit a new upper Y drive board


Brian

WILLYAM1:
thanks brainstorm.
i will order the 2 y drive and  post the resolt.
willyam1

WILLYAM1:
hello everyone.
i got 2 y drive today from FLAT PANEL U.K.
I ASEMBELED THEM .
TV WORKS FINE.
some flashing dots and color is a littel beat splashing.
maybe some adjusment in y sus board.
keep posted .
willyam1.
thanks brain and waxhead.

waxhead:
Well done on the repair. :13:

sorry i wasnt much help. :wink1:

Navigation

[0] Message Index

[#] Next page

[*] Previous page