Author Topic: Phillips/Samsung PDP S42SD-YD06 (Read 11271 times)

old tvman · « **on:** August 31, 2010,11:26:37 »

The problem with this set is a very dull picture sound ok. The power board appears to be ok and the fuses to the xsus/ysus are intact.Can anyone help?

Mulja tv repair portal · « **on:** August 31, 2010,11:26:37 »

Turnip · « **Reply #1 on:** August 31, 2010,12:32:59 »

Hi TVOM,

With LG it could be Z-sus shot - had the prob, but with Philips - who knows - Chris.

old tvman · « **Reply #2 on:** August 31, 2010,15:03:57 »

Cheers Chriss, basically it is all LG boards and the fault looks similar to others where the fuse in the zsus is blown

Mulja tv repair portal · « **Reply #2 on:** August 31, 2010,15:03:57 »

Turnip · « **Reply #3 on:** September 01, 2010,13:00:50 »

Hi TVOM,

So, are those Z-Sus fuses blown ? - or what (there was a chap on Quuq who lifted the heat sink and mended his LG Z-Sus) he seems quiet lately, but ever ready to enthuse on his success - Chris.

old tvman · « **Reply #4 on:** September 01, 2010,15:25:51 »

Chriss,
There are no blown fuses or circuit protectors,I've ordered a replacement board and will update when I fit it
Here's hoping!

old tvman · « **Reply #5 on:** September 03, 2010,10:18:25 »

It worked

Mulja tv repair portal · « **Reply #5 on:** September 03, 2010,10:18:25 »

Turnip · « **Reply #6 on:** September 03, 2010,13:05:29 »

Hi TV OM,

Congrats, but you didn't say what board you replaced,

All agog, quuq folks with ears pricked - Chris.

old tvman · « **Reply #7 on:** September 07, 2010,11:29:03 »

Z SUS board replaced ,sorry for the delay.

Mulja tv repair portal · « **Reply #7 on:** September 07, 2010,11:29:03 »

Mulja tv repair portal

News: