Author Topic: BUSH IDLCD26TV07HD ,NO PICTURE (Read 5677 times)

JAYROD · « **on:** August 14, 2010,18:04:52 »

The fault on this lcd tv is,no picture when first switched on,sound is present.As tv warms up faint horizontal lines start to appear and eventually after about 30 mins a good picture will appear. I think that the T,CON board may be faulty. Any other ideas?

Thanks, phil.

Mulja tv repair portal · « **on:** August 14, 2010,18:04:52 »

Turnip · « **Reply #1 on:** August 15, 2010,13:53:54 »

Hi Phil,

Gather this is a Beko - nothing listed here but some 26 inch sets are renown for screen probs. Try a little heat, vibration and screen twisting to see if anything shows up.

Out of interest, what's the T'con board.

All the best - Chris.

JAYROD · « **Reply #2 on:** August 17, 2010,07:30:40 »

Hi chris, here is a photo of board and on screen fault after tv has been on for about 10 mins.

phil.

Mulja tv repair portal · « **Reply #2 on:** August 17, 2010,07:30:40 »

Turnip · « **Reply #3 on:** August 18, 2010,12:56:09 »

Hi Phil,

Nice pic, bet you'll get some feedback from knowing folks - Chris.

sparky · « **Reply #4 on:** August 18, 2010,13:03:59 »

hi
think turnips right screen prob gone have you tried connecting scart out
of you tv to another if you get a good pic 9out10 screens caput
dave

Mulja tv repair portal · « **Reply #4 on:** August 18, 2010,13:03:59 »

Mulja tv repair portal

News: