Forum > LCD TV forum

Hannspree jt01-32e2 colour looks like a negative film

(1/4) > >>

jameshoward:
Hi all :051bye:

I also have a hanspree jt01-32e2. the problem with this one is that the colour has gone all strange.  It looks like a negative from a camera. i have had a look at the pcb and found no swollen caps.

i dont think there is a prob with the power pcb as the screen comes on with a pic and there is good sound just the picture is a bit messed up. 

Is there any caps that i should check or a res that mite have gone open. 

This one is for my comp so currently stuck with a small screen  .....cry

any help or sugestions would be super.   :72:

Thanks in advance

James Howard

davenjax:
hi james i cant help with the fault this time however i do have two of these for sale with the inverters gone power supply /tcon board main board and screen are all good .rgds dave

Turnip:
Hi Folks,

Just a thought as some folks might not have Hannspree listed (I don't) so what's the chassis, or a piccy so we can work it out  - Guess it's a Beko - Chris.

davenjax:
yeah i think its a beko it takes about 2 weeks to remove all the screws before you can even get to anything to look at but i have had a similar fault on a bush 32"hd lcd. i did some random soldering on some dodgy looking joints and it seemed to sort it although wish i knew which one it was so i could pinpoint it

sparky:
hi
have you tried connecting to another tv thro scarts?
if pic ok try the lead that connects main board to t-con
dave

Navigation

[0] Message Index

[#] Next page