plasman enop 42v7

[WILLYAM1]

HI to all.
sound ok dead screen with few spots.
after changing plasma kit(3 boards y+z+c)picture is very good accept a very thin line from up to bottom scrren in left corner of the screen.
is it a panel problem or x left board.
ant one hadesame problem.
atache phto.
willyam1

[ozzietech]

Could be panel, but clean the flexi under the line and check any check any OC or dry joint resistors on flex.

[WILLYAM1]

thanks ozzieteck.
all ready made all this checks( oc  cof cleaning dust  )    somthing else ? anyone?.
willyam1