Author Topic: Bush idlcd26tv22hd/vestel (Read 5801 times)

digitech1962 · « **on:** October 02, 2010,07:23:31 »

Dead no standby light on psu is 17pw15.9 no fuse blown bridge ok cust on a budget so would
like to fix thanks

Mulja tv repair portal · « **on:** October 02, 2010,07:23:31 »

davenjax · « **Reply #1 on:** October 02, 2010,11:20:44 »

i may have a power supply from a sanyo/vestel 25.00 if thats any help ?

chrissie jones · « **Reply #2 on:** October 02, 2010,11:31:20 »

im not sure but i think a 17PW.15.8 will go in.if so iv'e got one £15+ make sure first.

Mulja tv repair portal · « **Reply #2 on:** October 02, 2010,11:31:20 »

digitech1962 · « **Reply #3 on:** October 04, 2010,06:35:26 »

hi thanks lads 15.8 wont do 15pw20.1 or v1 v2

Sorry I made a typing error the message should be

17PW20.1 OR V1 V2

chrissie jones · « **Reply #4 on:** October 04, 2010,06:45:51 »

i will see if i have one.

davenjax · « **Reply #5 on:** October 04, 2010,08:03:08 »

hi sorry i only have 17pw psu's will the kit from chs not help ?

Mulja tv repair portal · « **Reply #5 on:** October 04, 2010,08:03:08 »

Turnip · « **Reply #6 on:** October 04, 2010,11:22:14 »

Hi,

If you fancy digging around a bit, have some stuff on file - Chris.

chrissie jones · « **Reply #7 on:** October 05, 2010,02:34:26 »

good thinking batman.

Mulja tv repair portal · « **Reply #7 on:** October 05, 2010,02:34:26 »

Mulja tv repair portal