Author Topic: Eeprom File for Goodmans ld3260hdfvt (Read 5768 times)

eddolls · « **on:** September 29, 2010,11:34:14 »

Hello people,

I am repairing a Goodmans LD3260HDFVT with a 17mb15e-7 AV board. The problem is that the screen is black but the back light is working and power supply voltages are ok.

I have heard that there is a common fault on these boards for the eeprom to corrupt . I have searched the internet hi and lo including the downloadable s on this site, I have also phoned vestal direct to try and get old of this file with no joy.

Does any one know where I can get hold of said file??

Regards

Chris

Mulja tv repair portal · « **on:** September 29, 2010,11:34:14 »

Turnip · « **Reply #1 on:** September 29, 2010,12:37:59 »

Hi Chris,

Have something similar meself where a jolly Vestel screen displays weak bright piccies.

Just to be empathetic - Chris.

Kilroys · « **Reply #2 on:** September 29, 2010,14:57:51 »

Do you have sound from the speaker. If yes,
check the fuse on the lcd controller board.
They seems to be very weak, and could break without any reason.

Mulja tv repair portal · « **Reply #2 on:** September 29, 2010,14:57:51 »

eddolls · « **Reply #3 on:** September 30, 2010,06:51:20 »

ok Kilroys i will give that a go and post my results

eddolls · « **Reply #4 on:** October 09, 2010,06:56:17 »

Hi guys, sorry for the delay,
As kilroys said I checked the fuses on the lcd control board and they were gone. Replaced them and the tv fired up fine.

Thanks again

Chris

Turnip · « **Reply #5 on:** October 09, 2010,13:14:54 »

Hi Chris,

Congrats, and what screen drive fuses were the prob ?

Well, folks will ask, and they will want good piccies too - guess you will supply.

Never win, even with a decent camera with megawhatsits - Chris

Mulja tv repair portal · « **Reply #5 on:** October 09, 2010,13:14:54 »

Mulja tv repair portal

News: