Forum > LCD TV forum

Samsung LE40R88BDX Tuner problem ?

<< < (2/3) > >>

sparky:
hi
you will have to change chip

Kilroys:
This options handle the tuner

In Options table you got "READY" must be off

In adjust check "TUNER" = AUTO,
"Tuner Top Select SEMCO" = 10 and
"Tuner Top Select ALPS" = 13

Doing a lots of Samsungs PSU, and if the set was still clicking
I used Sparky advice and after the set was working I always had to change the options.

monstermonkey:
I had a 40" Sammy brought to me with a recapped PSU, but still clicking, so I did the EEPROM reset and had to set it all up again, including the panel details.

Once the correct panel was selected from the service menu, the acid trip visual effects in movie mode also dissapeared.

Just a thought, but do these tuners have seperate 33volt supplies ??

mzone:
hi kilroys sorted out the problem  :sign0098:

however i get full colour on normal tv channels ok.

 but when you switch to freeview mode the freeview menu is black & white and also when tuned in the channels are black and white also?

any ideas?

Contrast John:
Hi mzone
Found an old post by daz with all the software values for this model. Will take a while to work through them all but will probably cure your problem.
http://www.tv.quuq.org/forum/index.php?topic=2515.msg6249#msg6249
Regards
John.

Navigation

[0] Message Index

[#] Next page

[*] Previous page