Vestel - Digihome PVR160

[Turnip]

Hi Folks,

Had one of these in for no go. Replaced R1 (2m2) as you do, and C9(1000/16) on P/S (16PW36-2) as it was bulgy - still no go with chopper outputs low and fluctuating. Found 5v supply on pin 4 of PL451 to be near zero.

Checked for short on main board (16MB31-1) eventually finding D107 (SM zener of some sort) from 5v to deck to be S/C. Replaced with a 6v2 - seems OK, feel lucky  - Chris.