Forum > LCD TV forum

Samsung LE32B530P7WXXU Analogue only available

(1/2) > >>

monstermonkey:
This is one of my own sets and has been working nicely for quite a while, I primarily use it as a PC display through the VGA connector.

A few weeks ago I noticed it changing display modes back to 'Dynamic', thinking it was probably the PSU going dirty on me I made sure I had the caps to sort it and had some time free this weekend to sort it.

Last night I turn the set on and it came up with Analogue TV channel 1, weird as I hardly every use any other input apart from the VGA - hit the source button to change it and it only lists 'TV' - after some messing about trying to get it to redetect sources and it coming up empty handed I figured the EEPROM is probably corrupt so tried INFO > MENU > MUTE > POWER to no avail, I've tried getting into the service menu about 40-50 times, it simply won't go - I've searched for alternate methods to get into the service mode with no joy.

I pulled the back off this morning, thinking I can bridge the EEPROM and force a reset and get the service mode, trouble being I cannot identify which is the correct EEPROM

Also, I have updated the firmware to the latest version to no avail, another oddity is that if I press EXIT for 12 seconds and reset the TV I can only select Australia, New Zealand or Singapore as the country.

Anyone had this before?

monstermonkey:
Does anyone know the location of the EEPROM for this set, the mainboard is BN94-02710A - I'm suprised no one has had this set in yet.

sparky:
hi
you are not going thro the correct set up make sure tv on,
press power off>inf>menu>mute>power set will be in service menu
dave

monstermonkey:

--- Quote from: sparky on December 13, 2010,15:38:42 ---hi
you are not going thro the correct set up make sure tv on,
press power off>inf>menu>mute>power set will be in service menu
dave

--- End quote ---

** Hangs head in shame ** - Thanks sparky, I'll give that a shot

monstermonkey:
I've just tried getting into the service mode about 25 times using the following method:

With the TV on and showing an image, pressing POWER then INFO then MENU then MUTE then POWER - it will not enter service mode.

I've been into the service mode on other Samsung LCD TV sets without a problem, this one simply won't do it.

Is it a possibility that part of the logic is faulty? I'm pulling my hair out on this one!!

EDIT: I've attached a pic of the mainboard, can anyone identify the EEPROM from the image?

Navigation

[0] Message Index

[#] Next page