thompson 27LCDB03B psu

[meanodeano]

hi would anybody know the difference between a thompson 27lcdbo3b, psu and a thompson 27lcdbo3bu, psu and if so would the later board work in the thompson 27lcdbo3b , any help would be grateful

[sparky]

hi post a picc

[meanodeano]

heres the pics top pic is a 27LCDB03BU and the bottom pic is a 27LCDBO3B

[sparky]

hi
not sure are all the part numbers the same
dave

[meanodeano]

no but the boards look the same

[Turnip]

Hi M/D,
Nice piccies - look pretty identical - so what's the prob ?  - you never said - Chris.

[meanodeano]

would anybody know the difference between a thompson 27lcdbo3b, psu and a thompson 27lcdbo3bu, psu and if so would the later board work in the thompson 27lcdbo3b

[Turnip]

Hi M/D,

Some difficulty as you haven't yet stated a problem - perhaps it's one of those situations where a Moon lander is realised from car scrap.

Just a phart from British V1 mankind - and so forth - Chris.

[sparky]

hi
if part numbers not same might not work,whats the fault on
the panel
dave

[Turnip]

Hi Sparks,

That's what I said - more or less - but in 'Norfolk' - Chris.

[meanodeano]

dont know im not an engineer ,but the set used to work , but not now, and no standby light, i just thought replacing the main power board might solve the problem thats all, im a noob at this lol

[Turnip]

Hi M/D,

Well said - you need to check where voltages disappear - If mains fuse if OK then usually the PFC lump is also OK. check voltage on Main (Big Black) capacitor (usually 350'ish) then get back to Quuq for Sparky's next advice - Chris.