Forum > LCD TV forum

Hitachi HIT19WDVB

(1/2) > >>

Turnip:
Hi Folks,

Have one of these where the inverter cuts after a couple of minutes - current problem is how to get the back off without smashing the set.

Any thoughts - A piccy of course - Chris.

sparky:
hi
chris could be same as lg you remove screws from the
back and very careful prise the front facisa off
same idea as some of the monitor
dave

Turnip:
Hi Dave and thanks,

Will sharpen a hatchet and dive in.

If it were a Hitachi/Vestel the back would fall off,

If a Profilo, would need a bucket underneath for that cappy goo,

If Samsung, a fire extinguisher before that yeller conductive glue say's 'Geronimo',

If any other sort'a  Turkey, well there's that sharp hatchet for Crimble - Chris.

brainstorm:
Hi Chris,

With all these small screen LCD sets you will find a wallpaper scraper is a handy tool to have to avoid cracking the plastic

Brian

Turnip:
Hi Brian, and thanks.

Guess you've been lickin' them bus winders agin - all Johnny Vegas and Tiny Tim. Bit of a Bleak house here after Crimble with all those programmable remotes based on the same (Euro) design - glad we're not.

Guess from feedback that some folks don't dig Norfolk joys - some say we're a bit different. Probably all that 'Pillage' stuff we did after thinking folks who voted 'Mamma Mia' total crap way back when decent plundering ships had a Maggie figurehead.

Never political, but, grill me a beefy Tory Catholic, won't even nibble   - Chris

Navigation

[0] Message Index

[#] Next page